Getting Started - Prestigio MultiPad 7.0 ULTRA plus Quick Start Manual

1 Power
2 Earphone Jack • Earphones connection.
3 USB port
Vol +\ Vol -
4
Button
5 Speaker
6 Camera
7 Reset
Micro SD Card
8
Slot

Getting started

1. Charging
• Insert micro USB cable into the device and connect the other end to your
PC for charging.
• Normally it takes approximately 4 hours to fully charge the device.
Operating the device while charging may extend the time of full charging.
2. Power on/Power off
• To turn on the device, press and hold the power button until you see the
start-up screen, and then release the button. It will automatically enter
the Home screen. If it is your first time to use it, it will enter Prestigio
Wizard screen, please follow the on-screen instructions to finish settings.
• Press the power button once to enter sleep mode and press it again to
awake the device.
• Press and hold the power button, and then tap OK to power off the
device.
• Turn on/off the device; Suspend/Activate the
device.
• USB connection.
• Adjust the volume level.
• Emit sound, voice or music.
• Take photos.
• Reset the device if it fails to operate correctly.
• Insert Micro SD card.
Quick Start Guide
Prestigio MultiPad