Changing A Bulb - PEUGEOT 207 CC 2014 Handbook

9
PRACTICAL INFORMATION

CHANGING A BULB

Front lamps
The headlamps are fi tted with polycar-
bonate glass with a protective coating:
 do not clean them using a dry or
abrasive cloth, nor with a deter-
gent or solvent product,
 use a sponge and soapy water or a
pH neutral product,
 when using a high pressure washer
on persistent marks, do not keep the
lance directed towards the lamps or
their edges for too long, so as not to
damage their protective coating and
seals.
i
Changing a bulb should only be
done after the headlamp has been
switched off for several minutes
(risk of serious burns).
 Do not touch the bulb directly
with your fi ngers, use a lint-free
cloth.
It is imperative to use only anti-
ultraviolet (UV) type bulbs to avoid
damaging the headlamp.
Always replace a failed bulb with a
new bulb with the same type and
specifi cation.
138
Model with conventional lamps
Model with elliptical module dipped
beam headlamps and directional
headlamps
1. Direction indicators
(PY21W amber).
2. Sidelamps (W5W).
3. Dipped beam headlamps
(H7-55W).
4. Main beam headlamps (H1-55W).
5. Directional headlamps (H7-55W).
6. Foglamps (H11-55W).
Changing the direction indicator
bulbs
 Turn the bulb holder one quarter of
a turn and remove it.
 Pull the bulb then change it.
To refi t, carry out these operations in
reverse order.
i
Amber coloured bulbs, such as
the direction indicators, must be
replaced with bulbs of identical
specifi cation and colour.