Repair procedure
1. Sealing
Switch off the ignition.
Turn the selector A to the
"sealant" position.
Check that the switch B is in
position "O" .
i
Avoid removing any foreign bodies
which have penetrated into the tyre.
Uncoil the white pipe G fully.
Unscrew the cap from the white pipe.
Connect the white pipe to the valve
of the tyre to be repaired.
!
Take care, this product is harmful
(e.g. ethylene-glycol, colophony...)
if swallowed and causes irritation
to the eyes.
Keep this product out of the reach
of children.
PRACTICAL INFORMATION
Connect the compressor's electric
plug to the vehicle's 12 V socket.
Start the vehicle and leave the engine
running.
!
Do not start the compressor be-
fore connecting the white pipe to
the tyre valve: the sealant product
would be expelled through the pipe.
9
129