PEUGEOT 207 CC 2014 Handbook page 133

2. Infl ation
 Turn the selector A to the
"air" position.
 Uncoil the black pipe H fully.
 Connect the black pipe to
the valve of the wheel.
 Connect the compressor's electric
plug to the vehicle's 12 V socket.
 Start the vehicle again and leave the
engine running.
!
As soon as possible, go to a
PEUGEOT dealer or a qualifi ed
workshop.
You must inform the technician
that you have used this kit. Af-
ter inspection, the technician will
advise you on whether the tyre
can be repaired or if it must be
replaced.
PRACTICAL INFORMATION
 Adjust the pressure using the com-
pressor (to infl ate: switch B in po-
sition "I" ; to defl ate: switch B in
position "O" and press button C ), in
accordance with the vehicle's tyre
pressure label (located on the left
hand door aperture).
A loss of pressure indicates that the
puncture has not been fully plugged;
contact a PEUGEOT dealer
qualifi ed workshop for assistance.
 Remove and stow the kit.
 Drive at reduced speed (50 mph
[80 km/h] max) limiting the distance
travelled to approximately 120 miles
(200 km).
9
or
131