Service Indicator - PEUGEOT 407 2010 Manual

1

SERVICE INDICATOR

This is a visual reminder of when the
next service is due. This service is to
be carried out according to the manu-
facturer's servicing schedule.
Operation
As soon as the ignition is switched on
and for 5 seconds, the spanner sym-
bolising the service operations is lit.
The trip recorder display shows the
before the next service.
Example : when switching on the ig-
nition and for 5 seconds, the display
shows that 900 miles/km remain be-
fore the next service is due.
Once an engine oil level indication has
been displayed, the display indicates
the total and trip distances.
26
If the service is overdue , each time
the ignition is switched on and for
5 seconds, the distance and the span-
Example : when the ignition is switched
on and for 5 seconds, the display in-
dicates that the service is overdue by
300 miles/km. The service should be
carried out very shortly.
Once the servicing and oil level infor-
mation has been displayed, the total
distance recorder resumes normal op-
eration and the spanner remains lit.
The point at which a service is due is
calculated using two parameters:
- the total distance travelled,
- the time elapsed since the last ser-
vice.
The distance remaining
weighted by the time factor, depen-
ding on the user's driving conditions.
Service indicator zero re-set
Your PEUGEOT dealer carries out this
operation after each service.
However, if you carry out the service
yourself, the re-set procedure is as
follows:
Switch off the ignition,
Press and hold the trip recorder
reset button,
Switch on the ignition.
The display begins a countdown.
When the display shows "=0" , release
the button; the spanner disappears .
After this operation, if you
wish to disconnect the battery,
lock the vehicle and wait for at
the zero re-set will not be
registered.
may be