PEUGEOT 407 2010 Manual page 129

PRACTICAL INFORMATION
10 10
Fitting a wheel
Position the wheel.
Tighten the bolts by hand.
Partly tighten the bolts using the
wheelbrace.
Fold the jack 2 and remove it.
Fully tighten the bolts using the
wheelbrace 1 .
For vehicles with steel wheels, re-
ing its notch facing the valve and
press with the palm of the hand.
the covers.
Put the tool holder back in position.
correct position, to prevent any de-
Tighten the spare wheel securing
strap to prevent noise and for your
safety in the event of impact.
114
Reminder: for your safety, always
change a wheel:
- on level, stable, non-slippery ground,
- with the parking brake applied,
(position P for the automatic gear-
box),
- never go underneath a vehicle
which is supported only by a jack.
After changing the wheel:
- have the tightness of the bolts and
the tyre pressure of the spare wheel
checked as soon as possible.
- have the punctured wheel repaired
possible.
- have the spare wheel checked and
replace it in its boot recess.
Recommendations when using
the temporary spare wheel *
Your vehicle may be equipped with a
spare wheel with a different rim to that
of the standard wheel.
After use, replace it as soon as possible.
Follow the recommendations below
to avoid any alteration in vehicle han-
dling:
- do not drive above 50 mph (80 km/h) ,
- drive carefully,
on the label.
Information on the instrument
panel:
Punctured tyre warning
lamp
system warning lamp
These original equipment wheels are
tion"). The warning which detects the
with the pressure sensor signals the
anomaly. Have the wheel repaired and
checked by a PEUGEOT dealer.
* According to version and country.