Advertisement
Quick Links
HEAVY DUTY ELECTRIC SOLID HOT PLATE
GENERAL SPECIFICATIONS
Width: 12.0" Depth: 24.0" Height: 11.5"
ELECTRICAL SPECIFICATIONS
Volts
KW
3.9
208
5.2
240
Dual voltage units - specify single phase or three phase.
"Cord supplied with 1 phase, NEMA-6.
Model HDEHP
Amps Per Line 3 Phase
Amps 1 Phase
Li
18.7
16.3
21.7
18.7
Thank you for purchasing this product.
To ensure proper use, we recommend that you
read this instruction manual before operating the
unit.
Type Receptacle Req'd.
L3
L2
9.4
9.4
30A - 240V (NEMA 6 - 30R)
10.8
10.8
1 Phase Only
Operation Manual
NQ17A December 2006
Advertisement
Related Manuals for Cecilware HDEHP
Summary of Contents for Cecilware HDEHP
- Page 1 21.7 Dual voltage units - specify single phase or three phase. "Cord supplied with 1 phase, NEMA-6. Model HDEHP Thank you for purchasing this product. To ensure proper use, we recommend that you read this instruction manual before operating the unit.
- Page 2 UNPACKING AND INSPECTION: Carefully lift your Heavy Duty Electric Solid Hot Plate out of shipping container, and inspect immediately for shipping damage. Install 4-inch legs as follows: Remove the legs from plastic shipping bag, turn your Heavy Duty Electric Solid Hot Plate on its side and screw legs into the four holes provided in bottom. NOTE: Your Heavy Duty Electric Solid Hot Plate was shipped in a carton designed to give it maximum protection in normal handling.