Related Manuals for Oxdale TM400
Summary of Contents for Oxdale TM400
- Page 1 Operating and Maintenance Instructions Keep for future reference TM400 Log Splitter...
-
Page 2: Table Of Contents
QUICK GUIDE including storage and transport........................5 IN-DEPTH INSTRUCTIONS..............................6 OPERATING INSTRUCTIONS............................... 8 POST OPERATING CHECKS & MAINTENANCE INSTRUCTIONS ..................10 WARRANTY INFORMATION ..............................11 TECHNICAL SPECIFICATIONS – TM400 ........................... 12 CONTACT DETAILS................................13 WARRANTY REGISTRATION FORM ..........................14 DECLARATION OF CONFORMITY………………………………………………………………………………………………….….15... -
Page 3: Safety
Safety OXDALE PRODUCTS REQUIRES THAT ANYONE OPERATING OR MAINTAINING THE LOG SPLITTER SHALL READ AND UNDERSTAND ALL SAFETY, OPERATION AND MAINTENANCE DATA CONTAINED IN THIS USER MANUAL BEFORE USING THE LOG SPLITTER. The log splitter is an attachment for tractors. It is for SINGLE PERSON USE ONLY. -
Page 4: Labels
Safety labels & decals The TM400 log splitter should have the following labels attached. If any safety decals are missing or illegible they should be immediately replaced. • The following safety decals: • The following warning notices: WARNING! "Danger! Keep clear of moving parts!“... -
Page 5: Quick Guide Including Storage And Transport
The TM400 can be stored in a horizontal or vertical position. • Store in a dry location • Store in a safe location where the machine will not get knocked over • The TM400 can be transported in a horizontal or vertical position. It should be strapped securely. -
Page 6: In-Depth Instructions
In-depth instructions. Before first use. Fitting unit to tractor The log splitter is designed for fitting to a cat 1 / 2 tractor. This can be on the back end or if required at the front. The log splitter is to be fitted so that it is level when positioned at the required working height. - Page 7 Set Pressure relief valve. Before using the log splitter for the first time you must set the relief pressure on the control valve as indicated in the user manual for the vehicle being used to supply the hydraulic pressure. We would recommend that this should be set 100 –...
-
Page 8: Operating Instructions
Operating Instructions The log splitter is designed for splitting logs only AND IS FOR SINGLE PERSON USE. Maximum log length 450mm. Maximum width 900mm, minimum 75mm width. Only persons competent to do so and having read in full this manual should use this log splitter. Before using the log splitter for the first time each day carry out a visual inspection taking note of any damage and leakages and ensure that they are fully repaired before using. - Page 9 Lowering the handle will lift the wedge. Pick your log to be split; the log should have been cut square at both ends. This is very important as it will reduce the chance that the log will slip. Position the log under the wedge with the point of the wedge in the centre of the log.
-
Page 10: Post Operating Checks & Maintenance Instructions
Check for any loose bolts or other damage at regular intervals. If the log splitter is going to be stored then this should be in a dry location and safely to avoid knocking the machine over. The TM400 can be stored in a horizontal or vertical position. Hydraulic System. -
Page 11: Warranty Information
Pressure adjustments to the valves must only be carried out by Oxdale authorized dealers. No liability is accepted for damage caused by Oxdale products in so far as they are caused by incorrect repairs or the non-use of original Oxdale replacement parts or in so far as repairs have not been carried out by Oxdale or a pre-authorized specialist, the same applies to auxiliary parts and accessories. -
Page 12: Technical Specifications - Tm400
Technical Specifications – TM400 TM400 Log Splitter Weight 64 kg Tractor Mounting Cat 1 / 2 Spool Block Max Pressure 4780 psi / 330 Bar Max continuous pressure 250 bar / 3600 psi Ram Bore diameter 60mm Max peak pressure... -
Page 13: Contact Details
Contact details. Oxdale Products can be contacted using the details below, these details can also be used for ordering spare parts. Oxdale Products Stanfree Farm Low Road Clowne Derbyshire S43 4LQ Tel:-01246 529020 Fax:-01246 812722 Mobile:-07813 111885 Email:- sales@oxdaleproducts.co.uk Our web site can be viewed at... -
Page 14: Warranty Registration Form
………………………………………………………………………… Tel No ………………………………………………………………………… ………………………………………………………………………… Email ………………………………………………………………………… Serial No …………………………………….……………………………… Model No ……………………TM400…………….………………………… Date of Purchase ………………………………………………………………………… Please ensure that all details are correct and return to Oxdale Products Units 20-21 Stanfree Farm Foxwood Road Low Road Off Sheepbridge Lane...
Need help?
Do you have a question about the TM400 and is the answer not in the manual?
Questions and answers