Advertisement
Hardware Connection
WPS
1. Connect the power adapter to the camera.
2. Turn on your wireless router.
Before you start, please note:
Make sure your smartphone is located near the camera.
Do not use an ethernet cable to connect the camera if
you want to use a wireless connection.
Make sure smartphone is connected to your wireless
router.
2
Add the IP Camera
You can add the IP Camera by Smart Phone.
1. Download the App
You can go to the App Store or Google Play store and
search and install "SAB IPC Viewer".
The App icon will be displayed after successful
installation:
SAB IPC Viewer
2. Add the IP Camera
Run the APP, then you can tap the "+" button on the
App and follow the wizard to add your camera.
3
Access the IP Camera
After your camera has been successfully added, you
can access the IP Camera via the App or computer.
Please Note:
If you want to use your camera in tranditional way, you
can search and access its local website in LAN(Local
Area Network).
Please copy the "IP Camera Search Tool" file from the
CD to your computer, run it to search and access the IP
Camera in LAN.
4
FAQ
Forget Username / Password
Restore camera back to factory settings:
1. Press "Reset" button for about 10 seconds with camera
powered on.
2. Release the button and wait about 30 seconds, the
camera will automatically restart, and restore factory
settings with its username / password recovery to
admin / (blank) .
Please Note:
After restore to factory default settings, you need to
config the Wi-Fi connection again, you can follow
the Setup Wizard of the App to add again.
In case your device failed to add by Wi-Fi, you can
use WPS or wired connection. please refer to the
User Manual on the CD.
Advertisement
