Behringer Pro-1 Documentation And Instructions page 39

Behringer Pro-1 Ctrlr panel documentation and instructions
Saving a patch as an Ableton preset
At this stage, while it is possible to save a preset, it seems not possible to load/change a
preset from the panel without having a series of popup windows opening one after each
other (just click Cancel). The workaround is thus to always use the LOAD and SAVE buttons
from the Pro-1 panel itself.
It is possible to save the current patch as an Ableton .fxp preset by clicking on the Save button in the
small instrument window at the bottom. However – see last paragraph – it is not possible to load a
preset in a nice way
Creating a new track from an Ableton preset
Not found... It seems it is always needed to first create a track with the instrument plugin and then to
select a preset (but this doesn't work – see next paragraph).
Replacing the preset on an existing track by another preset
This is not working. Changing preset is triggering the opening of several popup windows for an
unknown reason (just click Cancel for each window).
The workaround is just to use the Load button or the File Browser inside the panel to change patch.
sunny.synths@gmail.com
v2.0
Page 39 of 49