Way Of Working; Using The Buttons And Modifying Parameters; Quick Reset To Default Value - Behringer Pro-1 Documentation And Instructions

Behringer Pro-1 Ctrlr panel documentation and instructions

Way of working

As you will discover by yourself, the usage of the panel is pretty straightforward but there are
anyway different specific things you should know... 

Using the buttons and modifying parameters

Triple switch buttons are moving between their different positions by each click
Momentary push buttons are activated by simply clicking on them (what a
surprise...). They will momentary flash.
Permanent toggle buttons are activated by simply clicking on them (what a surprise...).
They will stay highlighted until the next click.
Parameters presented as pulldowns are modified by opening the pulldown and
selecting one of the pull-down items.

Quick reset to default value

Most of the rotary encoders have default values set and you can quickly revert to this preset default
value by double-clicking on the button. Try with the Master Tune encoder.
sunny.synths@gmail.com
You modify parameters using rotary encoders by clicking on the button then
moving the mouse cursor vertically up or down.
You can also modify any rotary encoder based parameter by hovering the
mouse on the button then using the mouse scroll wheel.
Toggle buttons are modified by simply clicking on them. There is no left/right;
up/down effect; just a simple toggle between the two positions
v2.0
Page 11 of 49