Trouble Shooting - Xsarius i-GO HD1 Manual

English

8 Trouble shooting

Problem
LED on front panel does
not light
No picture or sound
Black-and-white screen
or V-Hold
The remote control is
not working
Distorted menu screen
Not working
MADE TO ENJOY
Possiblecause
AC Power cord
disconnected
Wrong connection of the Video/audio
output to TV input terminal
Wrong connection of antenna cable
No signal or weak signal
Wrong setting of channels Information
in MENU screen
Your TV mode is different from
broadcasting mode
Battery exhausted
Fluorescent light interfering with the
remote control
Remote control is incorrectly aimed
Too high brightness and contrast level
of TV set
Process down
60
Solution
Connect power cord properly into
the power socket
Connect two terminals correctly
With SCART, RCA or RF cable
Connect the antenna cable correctly
Type the setting value correctly
Check the cable connections
and Satellite-Dish alignment
Type the setting value correctly
Use TV of same mode
Use the NTSC/PAL converter
Connection to the receiver and TV
Change the batteries
Switch off the light
Aim the remote control at the
receiver
Adjust brightness and contrast to
low level
Switch off the receiver, remove the
power cord. After a short moment
re-insert the power cord and switch
on again.
© Copyright 2011 - Xsarius