Connecting The Receiver - Xsarius i-GO HD1 Manual

English

5 Connecting the receiver

Please note: HD Signals are not transferred via RCA-Video or SCART – For HDTV Signals and
also for the best quality on SDTV please use an HDMI cable where possible.
ConnectingtheReceivertoTVbyusinganHDMICable
1
Connectthecoaxialcable
(Cable from your Satellite Dish) to the
connector marked „LNB IN" at the rear of the
receiver.
2
ConnecttheHDMI-Cable
Connect an HDMI-Cable between the HDMI
ports of your TV Set and your Receiver.
3
Connectpowersupply
Connect the external 12V Power Supply
MADE TO ENJOY
44
© Copyright 2011 - Xsarius