Lcd Display; Function Keys; Initial Set-Up; Weighing Only Operation - HoMedics SC-465 Instruction Manual And Warranty Information

LCD DISPLAY

FUNCTION KEYS

Enter BMI, BMI-for-age Percentile and weighing mode
[SeT] •
• Confirmation button for selection
• Recall the parameters (Height, Age, Gender, last measured weight, last measured
BMI, last measured BMI percentile) from 5 memories
▲ & ▼ • Change value of height and age
• Toggles between Male and Female
• Select memory in Memory mode & Recall mode
• Fast recall of memory location
• Clear contents of the user memory in Recall mode

Initial Set-Up

1. Insert 1 pcs CR2032 lithium batteries into the battery compartment.
2. Select between kilogram and pound conversions with the slide switch at the bottom of the
scale.
3. Use the scale on a flat, hard floor surface.
4. The scale must be initialized after each battery insertion or replacement. Press lightly on the
scale platform to initialize the scale, the display will show
is ready for use after the scale turns off.
5. Replace battery when

weighing Only Operation

1. Step onto the scale and stand still while the weight is
computed. (Fig. 1)
2. The screen displays the weight. (Fig. 2)
3. The scale turns off automatically after use.
weighing with bMI and bMI-for-age Percentile Functions
1. Set height
Press [Set] key to enter BMI/BMI-for-age Percentile Mode.
The height displays blinks (Fig. 3). Press [▲] or [▼] key to
adjust the height. Press [Set] to confirm.
2. Set Age
The age display blinks (Fig. 4). Press [▲] or [▼] key to
adjust the age. Press [Set] to confirm.
is displayed.
3
and then turn off. The scale
Fig. 1
Fig. 2
Fig. 3
WEIGHT
LB
WEIGHT
LB
HEIGHT