Valiryo Body dryer Instruction Manual page 34

2
Instructions for use
Installation and assembly
4
Connect the wires
Connect Valiryo® to the electrical network by plugging it in. Turn It on
4 2
to confirm it works (find the control pad's instructions on page 30).
Make sure it works properly. Try to connect the wires again in
case it does not.
Plug Valiryo® out of the electrical network, introduce the wires into
4 3
the column's slot, remove the adhesive paper from the branded plate
and stick the branded plate on Valiryo®.
A
5
DETALLE A
Plug VALIRYO
ESCALA 1 : 5
www.valiryo.com
in and, done!
®
29