MSI Z68A-G43 Series Manual page 40

▶ EIST
Enhanced Intel SpeedStep technology allows you to set the performance level of the
mcroprocessor whether the computer s runnng on battery or AC power. Ths field only
appears wth nstalled CPUs that support ths technology.
▶ Intel Turbo Boost
Enables or dsables Intel Turbo Boost whch automatcally boosts CPU performance
above rated specficatons (when applcatons requests the hghest performance state
of the processor).
▶ OC Gene Button Operaton
Ths field s used to enable/ dsable OC Gene functon.
▶ DRAM Frequency
Ths tem allows you to adjust the DRAM frequency. Please note the overclockng
behavor s not guaranteed.
▶ Adjusted DRAM Frequency
It shows the adjusted DRAM frequency. Read-only.
▶ DRAM Tmng Mode
Select whether DRAM tmng s controlled by the SPD (Seral Presence Detect)
EEPROM on the DRAM module. Settng to [Auto] enables DRAM tmngs and the
followng "Advanced DRAM Configuraton" sub-menu to be determned by BIOS based
on the configuratons on the SPD. Selectng [Lnk] or [Unlnk] allows users to configure
the DRAM tmngs for each channel and the followng related "Advanced DRAM
Configuraton" sub-menu manually.
▶ Advanced DRAM Configuraton
Press <Enter> to enter the sub-menu.
▶ Command Rate
Ths settng controls the DRAM command rate.
▶ tCL
Controls CAS latency whch determnes the tmng delay (n clock cycles) of startng
a read command after recevng data.
▶ tRCD
Determnes the tmng of the transton from RAS (row address strobe) to CAS
(column address strobe). The less clock cycles, the faster the DRAM performance.
▶ tRP
Controls number of cycles for RAS (row address strobe) to be allowed to pre-charge.
If nsufficent tme s allowed for RAS to accumulate before DRAM refresh, the DRAM
may fal to retan data. Ths tem apples only when synchronous DRAM s nstalled
n the system.
▶ tRAS
Determnes the tme RAS (row address strobe) takes to read from and wrte to
memory cell.
En-29