World Time - Casio Pathfinder PAG80 Operation Manual

Historical Record
The historical record shows data for all save sessions performed since the
last time the historical record was cleared.
Data Type Screen Name
MAX
High Altitude Highest altitude reached during all
sessions.
MIN
Low Altitude Lowest altitude reached during all
sessions.
ASC
Total Ascent Total cumulative ascent during all sessions.
DSC
Total Descent Total cumulative descent during all
sessions.
To view periodic records and current session record contents
1. Enter the Data Recall Mode.
2. Use the C and A to scroll through the data and display the one you
want.
Periodic
records
C
REC ( 1 ) REC ( 2 ) REC ( 40 )
A
• To view the current session record contents, use C to scroll forward past
the last periodic record (which will display the current session record
screen), or A to scroll back past the first periodic record (to the
screen).
3. After you are finished viewing data, press D to exit the Data Recall Mode.
• Dashes (
xxxx ) will be displayed if data has been deleted or if there is no
x
corresponding data due to error, etc. In such cases, total ascent and total
descent values will show zero.
To view historical record contents
1. Enter the Data Recall Mode.
2. Press B to display the historical record high altitude screen (
3. Use the C and A to scroll through the historical record screens as shown
below.
Historical record data items
C
MAX MIN
A
4. To return to the periodic record and current session screens, press B
again.
5. After you are finished viewing data, press D to exit the Data Recall Mode.
Clearing the Historical Record
Use the following procedure when you want to clear the contents of the
historical record and restart all values from zero.
To clear the historical record
1. In the Data Recall Mode, press B to display
the high altitude data (
record.
2. Hold down E.
•
CLR
display.
3. Keep E held down for an additional two
seconds until
• The historical record high altitude screen will
reappear when data deletion is complete.
• If you release the E button part way through
the above procedure, the watch will return to
the historical record high altitude screen
without deleting the data.
Operation Guide 2894
Description
Current session
record
MAX MIN ASC DSC
REL
MAX
REL
MAX
).
ASC DSC
MAX ) of the historical
will appear in the upper part of the
CLR
starts flashing.

World Time

World Time digitally displays the current time in
Current time in the zone
of the selected city code 30 cities (29 time zones) around the world.
• For full information on city codes, see the "City
Code Table".
• All of the operations in this section are
performed in the World Time Mode, which you
enter by pressing D.
Timekeeping Mode time
To view the time in another city
In the World Time Mode, use C (east) and A (west) to scroll through city
codes (time zones).
• When the currently selected time zone is one that includes mostly ocean, a
value indicating the zone's Greenwich Mean Time differential appears in
place of a city code.
• If the current time shown for a city is wrong, check your Home City time
settings and make the necessary changes.
To toggle a city code time between Standard Time and Daylight
Saving Time
1. In the World Time Mode, Use C (east) and
A (west) to display the city code (time zone)
whose Standard Time/Daylight Saving Time
setting you want to change.
2. Hold down E to toggle between Daylight
Saving Time (DST indicator displayed) and
Standard Time (DST indicator not displayed).
• The DST indicator appears on the display
whenever you display a city code for which
Daylight Saving Time is turned on.
• You cannot toggle between Daylight Saving Time and Standard Time if the
displayed city code is GMT .
• Note that the DST/Standard Time setting affects only the currently
displayed city code. Other city codes are not affected.
Stopwatch
The stopwatch lets you measure elapsed time,
1/100
split times, and two finishes.
Minutes
second • The display range of the stopwatch is 9 hours,
Hours 59 minutes, 59.99 seconds.
• The stopwatch continues to run, restarting from
zero after it reaches its limit, until you stop it.
• The stopwatch measurement operation
continues even if you exit the Stopwatch Mode.
• Exiting the Stopwatch Mode while a split time is
frozen on the display clears the split time and
returns to elapsed time measurement.
• All of the operations in this section are
Seconds
performed in the Stopwatch Mode, which you
Timekeeping
enter by pressing D.
Mode time
To measure times with the stopwatch
Elapsed Time
C C C
Start Stop Re-start
Split Time
C A A
Start Split Split release
sp
( displayed)
Two Finishes
C A C
Start Split Stop
First runner Second runner
finishes. finishes.
Display time
of first runner.
C A
Stop Clear
C A
Stop Clear
A A
Split release Clear
Display time of
second runner.
6