NextCentury TR4 Quick Start Manual

TR4
Quick Start Guide
Meet the next generation of the NextCentury Transceiver. The TR4 (indoor) is
part of an advanced meter-reading solution that can transform almost any meter
into a wireless smart meter, enabling it to automatically connect to the
NextCentury Cloud Platform. Setup and installation of the Transceiver is quick
and easy.
Package Contents
A
A) TR4 (Qty: 50)
B) Mounting Plate (Qty: 50)
Meter+™ Technology
Meter+™ Technology has been developed to allow a Transceiver model to
connect to virtually all modern submeter outputs. These include a variety of
different pulse-out meters as well as encoded output meters. Meter+™ Encoder
technology supports Sensus, Neptune, Amco, Elster, and GWF 3-wire protocols.
Simply wire the meter and Transceiver with the proper configuration, and it will
automatically detect which protocol to use. The Meter+™ Smart Pulse
detection allows the Tranceiver to detect, correct, and report faulty (ghosting)
reed switches.
Additional Resources
B
For full installation guide, spec sheets, and additional resources,
please visit:
products.nextcenturymeters.com/tr4
Contact Information
Phone: 844.538.8203 opt. 2
Email: support@nextcenturymeters.com
C
C) Sheetrock Anchors (Qty: 100)
D) Screws #6-20 (Qty: 100)
D