Connecting to a Component Video Output Device
Some video devices are equipped with a component video output terminal. You can use an
commercially available component video cable to connect the COMPUTER terminal of the projector to
the component video output terminal of a video device.
Important!
Always turn off the projector and the video device before connecting them.
Projector
AV terminal
COMPUTER terminal
Component video cable (commercially available)
Component video output terminals come in 3-terminal sets: Y·Cb·Cr or Y·Pb·Pr. Be sure to match
the colors of the plugs on a component video cable with the colors of the terminals (Green: Y;
Blue: Cb/Pb; Red: Cr/Pr).
Note that connection only to an analog component video output terminal is supported.
Connection to a digital output terminal is not supported.
Appendix
To component video
output terminals
Bundled special AV cable
40
Video device
To AUDIO output
terminals
Yellow
(Not connected)
Red
White