Samsung RZ11T7474 Series User Manual page 26

Maintenance
E
F
G
L
J
M
a
K
L
J
M
K
26 English
Untitled-6 26
7. On the bottom of the door, remove the
door cam riser (E) and the door stopper
(F) in that order.
- Use a Phillips screwdriver to remove
the screw fastening each part.
8. Fasten the door stopper (F) and the
door cam riser (E), in that order, to the
opposite side of the door.
- Use a Phillips screwdriver to fasten
each part with the screw.
9. Carefully lay the refrigerator down.
10. Remove the bottom hinge (G).
- Use a socket wrench (8 mm) to
remove the screws fastening the
bottom hinge (G).
11. Turn the leveling leg (H)
counterclockwise to remove it.
H
12. Use a socket wrench (8 mm) to remove
the screw (J).
13. Use an adjustable wrench to remove the
shaft nut (K).
NOTE
Loosen the leveler (a) if necessary when
removing the shaft nut (K).
14. Use a Phillips screwdriver to remove the
hinge shaft (L).
15. Remove the hinge cam riser (M).
16. Place the hinge cam riser (M) on the
opposite side of the bottom hinge.
17. Use a Phillips screwdriver to fasten the
hinge shaft (L).
18. Use an adjustable wrench to fasten the
shaft nut (K).
19. Use a socket wrench (8 mm) to fasten
the screw (J).
2020-12-29 3:31:37