Hytera PNC380 Manual
Hide thumbs Also See for PNC380:

Advertisement

Hytera Communications Corporation Limited
Hytera Tower, Hi-Tech Industrial Park North, 9108# Beihuan Road, Nanshan
District, Shenzhen, People's Republic of China
1. Product Overview

Advertisement

Table of Contents
loading

Summary of Contents for Hytera PNC380

  • Page 1 Hytera Communications Corporation Limited Hytera Tower, Hi-Tech Industrial Park North, 9108# Beihuan Road, Nanshan District, Shenzhen, People's Republic of China 1. Product Overview...
  • Page 2: Before Use

    2. Before Use 2.1 Installing the SIM Card and SD Card 1. Slide the battery latch to and remove the battery cover. 2. Remove the battery. 3. Open the card slot cover. 4. Put the card into corresponding slot. 2.2 Attaching the Battery ...
  • Page 3: Charging The Battery

    2.3 Charging the Battery  Use the approved charger to charge the battery.  Read the Safety Information Booklet before charging.  The remaining lithium-ion battery power is limited to 30% pursuant to the new lithium battery shipment regulation approved by International Air Transport Association (IATA). To charge the battery, connect the terminal to the power adapter, power bank, or computer with the USB cable.
  • Page 4: Attaching The Audio Accessory

    2.5 Attaching the Audio Accessory Open the cover of the audio accessory connector and insert the audio accessory into the connector. To ensure optimum waterproof and dustproof performance, close the cover after removing the audio accessory.
  • Page 5: Operation

    3. Operation 3.1 Powering the Terminal On or Off To power on the terminal, press and hold the key. To power off the terminal, press and hold the key, and select Power Off. 3.2 Adjusting the Volume To increase the volume, press + key. To decrease the volume, press –...
  • Page 6: Connecting To The Internet

    3.6 Connecting to the Internet You can connect to the Internet by using the cellular network or WLAN network. To connect to the cellular network, install the SIM card and activate the cellular data service. To connect to the WLAN network, do as follows: 1.
  • Page 7 4. PoC Service Push-to-talk over Cellular (PoC) provides direct one-to-one and one-to-many voice communication services over the cellular network. This service is available only when you have installed the PoC application on the terminal. You can access PoC menu to initiate a call. 1.
  • Page 8 FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 9 This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device. Le onjunc areil est conforme aux CNR d’...
  • Page 10 Les tests SAR sont effectués en utilisant des positions de fonctionnement standard acceptées par l'ISEDC avec l'appareil transmettant à son niveau de puissance certifié le plus élevé dans toutes les bandes de fréquences testées, bien que le SAR soit déterminé au niveau de puissance certifié...

Table of Contents