Video Output - Samsung VG-STC4000 User Manual

As the figure below shows, the TV camera is designed to be put on
the top of the TV.
1 Put the TV camera on the top center of your TV as shown above.
2 Connect the TV camera to your TV with a USB cable.
3 Clutch and hold the camera's neck, and bend its head to the
4 The TV camera is designed to be mounted. Do not apply
● To enable the Motion Control feature, select and activate the Motion
Checking the operating status of the camera
Audio input
VG-STC4000]IB_ZA_ZD_Rev_1.0_L16.indb 2
Installing the TV Camera
 
How to install the TV camera
angle you prefer.
excessive force when manipulating it.
Operating the TV Camera
Shutter
switch
Power
LED
Control menu from the TV menu.
✎ For more information on the Motion Control feature, refer to TV's
Menu → Support → e-Manual.
✎ Refer to the TV manual for more information about face recognition.
If the TV is powered on, check that the blue power
Power
supply LED on the front of the TV camera is turned on.
Connect to Skype™ → Select Settings → Select
Video
Change picture → Select Video snapshot → Check
output
the video display status
Connect to Skype™ → Select Contact → Select
Echo/Sound Test Service → Select Voice Call →
Record following voice instructions → Check the
recording after 20 seconds.
From the Menu screen, select System → Motion
Control → Motion Control Environment Test, and
Motion
Control follow the onscreen instructions to check the status
of the motion operations.
English-2
● Slide the cover switch on the top of
the TV camera to the left to expose the
camera lens.
● When you turn on the TV, the blue TV
camera operation indicator turns on and
off after a while.
✎ The indicator light turns on only
during calls.
● If you start Smart Hub and log on to
Skype™ via the Smart Hub menu, you
can perform voice/video calls.
✎ During video calls, in order to use the
face tracking function, you have to start
and update Skype. After turning the TV
off and on, it will be ready to use .

0 ~ 90˚
0 ~ 175˚
2014-01-14 9:16:06