Table of Contents
Advertisement
1 Caution for using
1.1 Surrounding environment conditions
Temperature： in use：-10℃～+40℃
In the transport and storage process：-25℃～+55℃；
Humidity： 20℃not exceeding 90%；
The torch (gun) should not be used in the rain or under similar weather conditions.
1.2 Cooling Water
● Never use a water-cooled torch for air cooling.
● Never use the Water leaked torch to prevent electrical shocks.
1.3 Cable Hose
1.4 Welding Operation and Exchange of Parts
● Do not touch directly the nozzle, electrode and torch body where the temperature rise.
● When welding, wear protective gear such as protective leather gloves designed for welding
operation.
● After turn off the power supply, exchange the torch parts when temperature is lower.
● Be sure to use the parts marked "Panasonic".
● Follow the standard for safety when using the grinding machine.
In case of a water-cooled torch. Use with cooling-water flow of more than
0.7L/min.Water pressure at the torch entrance is 0.1~0.3MPa for 4m cable
torch. 0.15~0.3MPa for 8m cable torch. Insufficient water flow can cause
burn out of the torch.
Do not bring the hose cable on the hat base metal immediately after
welding, load the heavy material on the cable hose, and bend it by force, It
can cause burn out of the welding torch.
Observe the following cautions to prevent burns.
For safety and good welding, exchange any damaged parts for new.
Wear protective glasses to protect the eyes when grinding electrode.
1
Advertisement
Table of Contents
