Bosch LR2 Operating/Safety Instructions Manual page 5

radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio TV technician for help.
Stay alert, watch what you are doing and use common
sense when operating a tool. Do not use a tool while you
are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating a tool may
result in serious personal injury or incorrect
measurement results.
Use safety equipment. Always wear eye protection. Safety
equipment such as dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate conditions will reduce
personal injuries.
equipment. The effect of the magnet plate 5 can lead to
irreversible data loss.
The A-weighted sound pressure level of the audio signal at one
meter distance is 85 dB(A).
Do not hold the tool close to your ear!
Use the correct tool for your application. The correct tool will
do the job better and safer.
Do not use the tool if the switch does not turn it on and off.
Any tool that cannot be controlled with the switch is dangerous
and must be repaired.
Store idle tool out of the reach of children and do not allow
persons unfamiliar with the tool or these instructions to
operate the tool. Tools are dangerous in the hands of
untrained users.
1.800.561.8187
Personal safety
Keep the measuring tool away from cardiac
pacemakers. The magnet plate 5 generates a field
that can impair the function of cardiac pacemakers.
Keep the measuring tool away from magnetic
data medium and magnetically-sensitive
Noise Information
Use and care
www.
-6-
information@itm.com
.com