Advertisement
B
C
Installing the Mower Deck
WARNING
Engage the parking brake, disengage PTO, stop
engine, and remove key before attempting to install the
mower deck.
1. Park the tractor, shut off PTO and engine, remove the
key, and apply parking brake. Turn the wheels fully to
the left.
2. Slide mower deck under right side of tractor so that
mower hanger is aligned with the tractor hitch bracket.
3. Turns wheels straight ahead.
4. Install mower hanger and rod (C, Figure 11) on tractor
hitch bracket using hitch pin (A) and safety clip (B).
20
5. Install cotter pin (A, Figure 9) and washer (B) that attach
mower support (C) to tractor frame. Repeat for other side.
6. Pull the idler pulley lever (A, Figure 10) to release belt
tension. Install belt (B) on the PTO pulley (C).
PTO Belt Replacement
pulleys.
1. Park the tractor on a smooth, level surface such as a
concrete driveway. Disengage the PTO, turn off the
engine, and lock the parking brake. Remove the key.
2. Pull the idler pulley lever (A, Figure 12) to relieve belt
tension. Remove the belt (B) from the PTO pulley (C).
A
3. Remove the old belt and replace with a new one. Pull
the idler pulley lever to install the belt on the idler pulley.
Make sure the V-side of the belt runs in the pulley
grooves.
Figure 11
C
WARNING
To avoid damaging belts, do not pry belts over
B
A
Figure 12
Hide quick links:
Advertisement
