TMI Products VD31 Operation Manual

[ VD31 ]
hour hand
dual hour
hand (24 hr)
second hand
date window
Local Time Time Indication
Time setting
(by turning CROWN)
Dual Time Time Indication
Time setting
(by pushing BUTTONS)
* After setting or changing the battery, before setting the time, check if the dual hour hand is at the
"0" (24 o'clock) position.
* If the dual hour hand is not at the "0" position, reset it following the procedure shown below :
1) Pull out the crown to second click (VD31) / first click (VD32).
2) Keep the buttons A & B pressed at the same time for more than 2 seconds, then release the buttons.
* Dual hour hand moves and returns to where it was.
3) Press button A or B to reset the dual hour hand to "0" position.
* Button A : hand moves counter-clockwise
Button B : hand moves clockwise
* The dual hour hand moves quickly if the respective buttons are kept pressed.
4) Push the crown back in the normal position.
Operation Manual
VD31 / VD32

DISPLAY AND CROWN/ BUTTON OPERATION

minute hand
Button A
1st click
2nd click
Crown at normal
position
Button B
24 hour hand
Hour hand
Minute hand
Second hand
24 hour hand
Date window
Crown at :
1st click
2nd click
Dual hour hand
Crown at :
Normal position
2nd click (VD31)
1st click (VD32)

ADJUSTING DUAL TIME HANDS POSITION

VD31
[ VD32 ]
hour hand
dual hour
hand (24 hr)
second hand
Date setting
Time setting
minute hand
Button A
1st click
Crown at normal
position
Button B
24 hour hand
VD31 VD32
VD31
Center hour hand
Center minute hand
Center second hand
3H subdial hand
O
Time setting
9H subdial hand (24 hr)
Button A : -1 hour / push
Button B : +1 hour / push
Button A : -10 minute / push
Button B : +10 minute / push
English
X
X