Maxx air NXMLRD Assembly Instructions

STEP 1
Included in the M-Series vent unit with
radiation damper are three pieces:
1) the M-series unit
2) the radiation damper with sleeve
3) the grille
STEP 3
Attach the radiation damper to the vent
unit by putting a screw through the holes
that line up on the bottom of the damper
sleeve with the holes that match up on the
vent unit.
NXMRD AssemblyInstructions
STEP 2
On two sides of the radiation damper sleeve are holes near the
bottom of the damper sleeve. These holes will line up with
matching holes on the top of the vent unit.
STEP 4
Once the vent unit with radiation damper has been assembled
and installed, attach the grille to the installed unit via the springs
and spring holes in the radiation damper.