Table of Contents
Advertisement
AUDIO TONES
With the exception of the actions described in the following table, all
actions are followed by a single tone to confirm that the Headset has
accepted the action. A double tone means that the action has failed.
Action
Mute
Volume up
Volume down
Locate the Headset
Call back list is empty
TROUBLESHOOTING
Note: For most problems, it is recommended as a first step that you
turn the Headset off for one minute and then on again. If that fails,
try pairing the Headset and phone again.
Problem
Pairing fails
Tone
On/off tone and mute reminder tone every 20
seconds
Tone on maximum volume
Tone on minimum volume
Buzzing
Two short beeps
Action
1. Delete scala-700LX from your paired
device list in your phone (if it is listed).
2. Turn off the mobile phone and Headset.
3. Take the battery out of the phone and
put it back.
4. Repeat the pairing process as described
in TURNING THE HEADSET ON FOR
THE FIRST TIME section above.
13
Advertisement
Table of Contents
