General Safety Instructions - LaserLiner ThermoSpot XP Manual

Completely read through the operating instructions, the „Warranty and Additional Information"
!
booklet as well as the latest information under the internet link at the end of these instructions.
Follow the instructions they contain. This document must be kept in a safe place and passed
on together with the device.
Function/Application
The ThermoSpot XP is an infrared and contact temperature measuring device with memory function
and a Digital Connection interface for transferring the measured data. Non-contact temperature measurement
of surfaces is realised by measuring and evaluating the amount of electromagnetic energy in the infrared
wavelength range. There is a connection for a temperature sensor (K-type) to facilitate contact temperature
measurement.

General safety instructions

– The device must only be used in accordance with its intendedpurpose and within the scope
of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will otherwise invalidate the approval
and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or the battery charge is weak.
– Do not power the temperature sensor (K-type) with an external voltage.
– Please ensure compliance with the safety regulations set out by local and national authorities
with regard to the correct and proper use of the device.
Safety instructions
Using class 2 lasers
Do not stare into the beam!
EN 60825-1:2014/AC:2017
– Attention: Do not look into the direct or
reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser
radiation, they should shut their eyes and
immediately move away from the beam.
– Under no circumstances should optical
instruments (magnifying glass, microscope,
binoculars)
– Do not use the laser at eye level (1.40...1.90 m)
– Tampering with (making changes to) the
laser device is not permitted.
12
EN
Laser radiation!
Class 2 laser
< 1 mW · 650 nm
Laser outlet
Laser warning message