Menu Settings - LaserLiner ThermoSpot XP Manual

5

Menu settings

+
ON
SET
Cont LOK
ALM
ALM HI
ALM LOW
Send All
16
EN
°C
Continuous measurement
By selecting the „Cont LOK" function, continuous measurements can
be carried out without having to permanently press the trigger button.
OFF
Continuous measurement starts by briefly pressing the trigger button.
A lock symbol appears on the display. The value is held (HOLD) by
long-pressing the button again.
!
The battery charge must be at least 15%
for continuous measurement.
Temperature alarm
By activating the „Temperature alarm" function, deviations from
the desired temperature range are indicated in colour in the display.
OFF
SET 1 ... 9 / Negative value (-) / 0
Data transfer
Transferring the entire measured value memory via Digital Connection
OFF
°F
SET
ON
SET
ON
SET
ON
SET
Confirm
Confirm
Confirm
Confirm
SET
3 sec
bestätigen