Safety Instructions; Inserting Battery - LaserLiner ClimaHome-Check Manual

Completely read through the operating instructions, the
„Warranty and Additional Information" booklet as well as
!
the latest information under the internet link at the end
of these instructions. Follow the instructions they contain.
This document must be kept in a safe place and passed on
together with the device.
Digital hygrometer for long-term room climate
monitoring
General safety instructions
– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme
temperatures or significant vibration

Safety instructions

Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility
regulations and limit values in accordance with EMC-Directive
2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers –
may apply. Electronic devices can potentially cause hazards or
interference or be subject to hazards or interference.
1
2
3
1 LC display
2
Toggle measurement in °C / °F
3
Switch on MAX/MIN values
4 CLEAR button
5 Battery compartment
6
Fold-out stand / clip
7 Integrated magnetic holder
1

Inserting battery

Open the battery compartment and insert
battery according to the symbols. Be sure
to pay attention to polarity.
04
EN
4
5
b
a
a Room temperature
b Measurement in °C / °F
c
Relative humidity in %rH
d Display of MAX values
e Display of MIN values
6
7
c
d
e