Suzuki 57100-27830 Installation Instructions Manual page 19

Handling Method
Grip heater warms right and left
grips when the Grip Heater Switch
B is turned on with the engine run-
ning. The Grip Heater Switch B
will be turned off when the ignition
switch is turned off.
The grip heater temperature can be adjusted in five steps by pushing the
switch. Pushing the switch changes temperature as follows:
OFF 5 : MAX
: Full light
: Half light
: Turn off
Improperly using the grip heater can be hazardous. Rider can suffer
burns even if the heating temperature is fairly low when the rider is
wearing no gloves and leaves the heater on for long periods. Dam-
aged grip can suffer burns or get an electrical shock.
• Be sure to wear gloves to avoid burns.
• Replace the damaged grips to avoid burns or electrical shock.
NOTE:
• The grip heater has a built-in automatic switch to avoid unnecessary battery
power consumption. The automatic switch turns off grip heater when the
engine speed becomes lower at engine idling speed. When the engine speed
increases, the automatic switch turns on grip heater.
• Pushing the switch will not turn on the grip heater when the engine speed is
low. Increase the engine speed and push the switch again to turn on the grip
heater.
Switch
4 3
WARNING
GENUINE SUZUKI ACCESSORIES
19/20
2
1: MIN