Table of Contents
Advertisement
Quick Links
1. Instructions
1)
Power ON/OFF
Power on: Press button for 3 seconds until 'Di' is heard, and then power indicator light is
lighted.
Power off: Press button for 3 seconds until four status indicator light is lighted and then off,
then the POS terminal is being turned off.
2)
IC Card
Put IC card chip side upward, push-in IC card slot and to bottom.
3)
Contactless Card
The card read area is above the EMV Contactless symbol.
4)
Battery Charge display
Connecting USB port with external adapter can charge the battery. If the power indicator
light is flashing red slowly, it indicates that pos is charging. If the power indicator is steady
green, it indicates that pos is full charge.
2.Terminal Specifications
Processor
Memory Space
Keyboard
IC Card Reader
Magnetic card
Contactless Card
Communication Mode
Interface
Audio
Power supply
Working Condition
D135 Secure Card Reader
Cortex M3, 96MHz
1MB in-chip Flash and 4MB Out-of-chip Flash,128KB SRAM
one ON/OFF/Download key.
Conform to ISO7816, EMV L1&L2 and PBOC3.0 standard
Conform to ISO7811, ISO7812 standard
Conform to ISO14443 TypeA & TypeB;Mifare ® standard
BT
1 Type-C USB (Device)
Buzzer
5V/500mA
Working temperature: 0℃~50℃
Advertisement
Table of Contents
Related Manuals for PAX D135
Summary of Contents for PAX D135
- Page 1 D135 Secure Card Reader 1. Instructions Power ON/OFF Power on: Press button for 3 seconds until ‘Di’ is heard, and then power indicator light is lighted. Power off: Press button for 3 seconds until four status indicator light is lighted and then off, then the POS terminal is being turned off.
- Page 2 Relative humidity: 10%~93% (Non-condensing) Storage Condition Storage temperature: -20℃~70℃ Relative humidity: 10%~93% (Non-condensing) 3. Installation and Usage Tips 1）Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty environment. 2）Forbid non-professional to repair the terminal. 3）Before insert the card, please check internal and around of IC card slot. if you found some suspicious objects , must report to related administrator.
- Page 3 FCC RF Exposure Information (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device is set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage near the body.
- Page 4 IEEE 1528 et IEC 62209. Cet appareil et sa ou ses antennes ne doivent pas être co-localisés ou fonctionner en conjonction avec tout autre antenne ou transmetteur. PAX TECHNOLOGY LIMITED reserves the right to change product technology specifications without notifying. PAX TECHNOLOGY LIMITED Manufacturer: PAX Computer Technology (Shenzhen) Co., Ltd.
Need help?
Do you have a question about the D135 and is the answer not in the manual?
Questions and answers