Setup - Nevir NVR-2580D Instruction Manual

Signal Intensity:
Signal Quality:
The green Signal Intensity bar and yellow Signal Quality bar indicate the real-time receiving condition of
the signal.
Use / button to select a setting item, and
Note: The frequency system automatically depends on the region where the receiver is in use, and the actual
frequency setting should follow the practice strictly.
When channel scan is under way, user can check the relevant parameters concerning the process and
progress:
Frequency band, Frequency, Modulation type, Guard Interval and FFT mode namely.
2.3 Tuner Setting
Select Tuner Setting and open the menu:
Tuner Power: On/ Off
This setting is designed to enable or disable active antenna depending on user's needs.
3. System Setup
Select Setup menu and press OK button to enter the System Setup window which consists of six submenus:
Language
TV System
Region and Time
Timer Setting
OSD Setting
Parental Lock
Use / button to select a submenu and press OK to enter it, and press EXIT button to leave.
3.1 Language
Select Language and press OK to enter the setting menu:
Language:, ten languages in total. English, French, Spanish etc.
First Audio: English, French, Spanish etc., totally 17 languages.
Second Audio: English, French, Spanish etc., totally 17 languages.
Use / button to change the language options if multiple languages are available. Press EXIT to leave
for the upper -level menu.
3.2 TV System
Select TV System with
Display Mode: AUTO, PAL and NTSC
Use button to change the options. User can also press OK button to pop up the option list and use
/
/ button to select one with OK button to confirm the change.
Aspect Ratio: 4: 3 LB (Letter Box)/4: 3 PS( Pan Scan/16: 9;
Use button to change the options. User can also press OK button to pop up the option list and use
/
/ button to select one with OK button to confirm the change.
Video Output: CVBS+RGB
CVBS+ RGB is the only option.
LCN mode: On/Off.
/ button to shift the options. Press EXIT button to leave.
/ button and press OK button to open the menu:
11