Advertisement
2A. INSTALLATION STEPS
Step 1 Measure and drill out the mounting holes and cable exit, if
necessary. Install the anchor screws into the mounting holes. See
Figure 2-1
Step 2 Thread the installation screws into the Mount . See Figure 2-2.
Note
:
The mount shown is for example only. The mount is sold
separately.
www.icrealtime.com
5
|
Figure 2-1
Figure 2-2
Step 3 Thread in the collar adapter and secure with locking screw as
shown in. Figure 2-3.
Figure 2-3
Step 4 Thread the cabling through the collar and base. Install the camera
to the collar adapter and secure with set screws. Installation of support
cable/ chain is recommended as well. See Figure 2-4.
Figure 2-4
Advertisement
