AEG IAE84411FB User Manual page 19

Problem
There is no sound when you
touch the panel sensor
fields.
comes on.
comes on.
and appear alternate‐
ly.
and appear alternate‐
ly.
and appear alternate‐
ly.
You hear a beep sound, the
indicators above
and the SenseBoil® function
does not start.
Possible cause
The sounds are deactivated. Activate the sounds. Refer to
Child Safety Device or Lock
operates.
There is no cookware on the
zone.
The cookware is unsuitable.
The diameter of the bottom
of the cookware is too small
for the zone.
The power is too low due to
unsuitable cookware or an
empty pot.
The pot is empty or contains
some liquid other than water,
e.g. oil.
There is too much or too lit‐
tle water in the pot.
You boiled some food other
than water and potatoes.
The boiling point was moved
in time and the SenseBoil®
function could not work prop‐
erly.
None of the cooking zones is
ready to be used with the
blink
SenseBoil® function. There
is some residual heat on the
cooking zones you want to
choose or they are still in
use.
ENGLISH
Remedy
"Daily use".
Refer to "Daily use".
Put cookware on the zone.
Use suitable cookware. Re‐
fer to "Hints and tips".
Use cookware with correct
dimensions. Refer to "Tech‐
nical data".
Use the appropriate type of
cookware. Refer to "Hints
and Tips" and "Technical
Data".
Do not activate any zone
with an empty pot on it.
Avoid using the function with
liquids other than water.
Refer to "Hints and Tips".
Only boil water and potatoes
with the use of SenseBoil®.
Finish your previous cooking
activities and choose a free
cooking zone without any re‐
sidual heat.
19