Connecting An External Monitor - Canon LV-7240 User Manual

Connecting an External Monitor

You can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB analog
image you're projecting.
To do so:
1. Turn off the power to your projector, monitor and computer.
2. Use an VGA cable to connect your monitor to the MONITOR OUT (Mini D-Sub 15 pin) connector on your projector.
3. Connect the supplied power cord. See page 19.
4. Turn on the projector, monitor and the computer.
NOTE: Daisy chain connection is not possible.
NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound.
VIDEO IN L R ANALOG IN-1 AUDIO IN
MONITOR OUT AUDIO IN
MONO
S-VIDEO IN AUDIO OUT
SERVICE PORT
L AUDIO IN R
MONO
(MONITOR OUT)
AUDIO ANALOG IN-2
AC IN
VGA cable (supplied)
VGA cable (not supplied)
16
2. Installation and Connections