Subscribe to Our Youtube Channel
Related Manuals for Altrex 4100 Series
Summary of Contents for Altrex 4100 Series
- Page 1 Mobile Safety ® Assembly and Use manual Rolling tower 4100 and 4200 Folding tower 4400-K2 EN 1004 760201-C-0711 www.altrex.com Relax. It's an Altrex. Relax. It's an Altrex. 1 of 32...
- Page 2 Altrex B.V. Zwolle. This publication may only be used for Altrex products. Misprints and printing errors reserved. Relax. It's an Altrex.
-
Page 3: Table Of Contents
Method of assembly ..........................................V Folding tower 4400-K2 ....................................... Configuration table ..........................................V.II Method of assembly ..........................................VI Ballast ..................................................VII Diagram of order of assembly 4200 ..............................VIII Parts for the 4000 serie ......................................Relax. It's an Altrex. 3 of 52... -
Page 4: I Introduction
If possible, and if it can be achieved safely, for liable for any loss resulting from the assembly or use additional personal safety, individuals working of an Altrex tower that is not in compliance with the on the assembly should secure themselves to manual. -
Page 5: Additional Instructions When Using Towers
/ manufacturers is not permitted, as this endangers configuration and ballast table; safety because no strength and stability calculation has been made for that mix configuration. 10. that the maximum assembly height is not Relax. It's an Altrex. 5 of 52... -
Page 6: Inspection, Care And Maintenance
6. Towers for professional use must be inspected annually for any defects by an expert. 7. The tower must be inspected again before use and in the case of an emergency such as a storm etc. Relax. It's an Altrex. 6 of 52... -
Page 7: Assembling And/Or Repair Of Replacement Parts
Replacement parts supplied by Altrex must be fitted product available for this purpose. Should it be to the correct Altrex product and in the same way as established during the investigation that the the part that is replaced. Assembly (attachment) and/... -
Page 8: Rolling Tower 4100
Triangular stabilizer Standard 4000-Series 305662 Toe board set 0.75 x 2.45 m 305570 13.8 Total weight (kg) including wooden platforms 1) I f the tower is used as a freestanding tower in this configuration there have to be 4 stabilizers around it. 2) 4 extra horizontal braces and 1 extra platform are required for assembly. *To only be used for a platform height up to 4.2 m! Relax. It's an Altrex. 8 of 52... -
Page 9: Method Of Assembly
Attach the couplers of the stabilizers to the uprights under the 2 and 7 rungs. Make sure that the end of each stabilizer is in contact with the solid surface and secure the Relax. It's an Altrex. 9 of 52... - Page 10 4th rung above the platform. From the platform, Secure the frames with the locking pins. position the 2 guardrail frames on the assembly frame. Secure the guardrail frames with the locking pins. Relax. It's an Altrex. 10 of 52...
- Page 11 19. Repeat step 8 and 9 until the desired platform height is reached. Assemble the guardrailing by following step 4, 5 and 6. The tower 4100 is now ready for use. Relax. It's an Altrex. 11 of 52...
-
Page 12: Rolling Tower 4200
Toe board set 1.35 x 1.85 m 305580 Total weight (kg) including wooden platforms *To only be used for a platform height up to 4.2 m Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. - Page 13 211.9 294.6 1 ) If the tower is used as a freestanding tower in this configuration there must be 4 stabilizers around it. 2) Two extra horizontal braces are required to assemble these configurations. *To only be used for a platform height up to 4.2 m Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex.
- Page 14 305585 14.9 Total weight (kg) including wooden platforms *To only be used for a platform height up to 4.2 m Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex.
- Page 15 Total weight (kg) including wooden platforms 1 ) If the tower is used as a freestanding tower in this configuration there must be 4 stabilizers around it. 2) Two extra horizontal braces are required to assemble these configurations. *To only be used for a platform height up to 4.2 m Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex.
-
Page 16: 12/14 Iv.ii Method Of Assembly
4. Align the wheels so that they point outwards. Lock the wheels by pushing down the brake pedal. Then set the base frame horizontally in the length and width direction using a spirit level on a rung and a horizontal brace. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. - Page 17 Ballast 5kg art. 415271 Attach 4 stabilizers to the corners of the rolling tower, at an angle of approximately 120° to the longitudinal axis of the rolling tower. Attach the Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex.
- Page 18 For the adjusting of the platforms at different configurations follow the diagrams for the order of assembly under VI. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex.
-
Page 19: Folding Tower 4400-K2
The tower is now ready for a platform height of 1 meter. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. - Page 20 Position the lowermost arm of the stabilizer approximately horizontally, assemble the stabilizers with the clamp couplings on the uprights and check the angle of 120°. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex.
- Page 21 21. Then, attach 4 stabilizers to the corners of the rolling tower, at an angle of approximately 120° Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex.
- Page 22 29. Place the guardrail frames and subsequently a plat- The platform in between can then be removed. form on the 7 rung of the frame. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex.
-
Page 23: Ballast
Ballast Item no. 415271 For a rolling tower 4400-K2 5.8 m, 2 ballast weights must be used per upright. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. -
Page 24: Diagram Of Order Of Assembly 4200
Diagram of order of assembly 4200 Relax. It's an Altrex. 24 of 52... -
Page 25: Parts For The 4000 Serie
Wheel ø 100 mm 324500 Wheel ø 125 mm 322010 Guardrail frame 75-50-2 303420 Wheel ø 200 mm 511220 Guardrail frame 135-50-2 303320 Horizontal brace (guardrail) 185-28-4 304304 Set of collar tubes 324501 245-28-6 304306 Relax. It's an Altrex. 25 of 52... - Page 26 Ballast holder 415277 Ballast 5 kg 415271 Relax. It's an Altrex. 26 von 52...
- Page 27 Altrex B.V. P.O. Box 30160 8003 CD Zwolle The Netherlands www.altrex.com Relax. It's an Altrex. Relax. Het is een Altrex. Relax. It’s an Altrex. 52 von 52 52 van 32...
Need help?
Do you have a question about the 4100 Series and is the answer not in the manual?
Questions and answers