Download Print this page

Siemens SL42 User Manual page 10

Hide thumbs Also See for SL42:

Advertisement


,QVHUW EDWWHU\
• Insert battery at the bottom of the
n
phone
and press inward until it
clicks into place
n
• Switch off the phone before you
remove the battery.
o
• Unlock battery
&KDUJH EDWWHU\
• The battery is not fully charged
when delivered, so:
n
• Interconnect the socket and the
n
Sync Station
power supply.
• Insert the phone into the Sync
o
Station
and press downward
until it engages. The contact mes-
sage is displayed (alternatively:
plug in power supply directly to
the phone).
%DWWHU\
All manuals and user guides at all-guides.com
o
.
o
n
, then remove
.
o
with the plug-in

The voltage indicated on the
Sync Station must not be
exceeded.
&KDUJLQJ
The charger heats up when used for long
periods. This is normal and not dangerous.
5
When charging is in progress.
F
End of charging
An empty battery is fully charged after
about 2 hours. Charging is only possible in
an ambient temperature of 5°C to 40°C
(the charge icon flashes as a warning when
the temperature is 5°C above/below).
8VDJH WLPH
A fully charged battery provides 60 to 170
hours of standby time or 1½ to 4 hours of
talk time. The standby times/talk times are
average values; the actual values depend
on the operating conditions (see table
below).
Charge level display:
B C D
Fully
charged
A beep sounds when the battery is nearly
empty.
Operation
Time
carried out
(min)
Calling
1
Playing music
30
Display
½
backlight*
Network search 1
*Key input, games, organizer etc.
Empty
Decrease of
standby time
30 - 60 min.
20 - 30 h.
30 min.
5 - 10 min.

Advertisement

loading