Safety Information - Z-EDGE UG34 Instruction Manual

SAFETY INFORMATION

•
Read these instructions - All the safety and operating instructions should be read before this
product is operated.
• Keep these instructions - The safety and operating instructions should be retained for future
reference.
• Heed all warnings - All warnings on the appliance and in the operating instructions should
be adhered to.
• Follow all instructions - All operating and usage instructions should be followed.
• Do not use this equipment near water, or in humid environments – The appliance should not be used
near water or moisture e.g. in a wet basement or near a swimming pool.
• Clean only with a dry cloth. Do not use solvents or petroleum based fluids.
• Do not block any ventilation openings.
• Do not install near any heat sources such as radiators, stoves or other apparatus (including
amplifiers) that produce heat.
• Do not tamper with the supplied plug. This plug is a BS1363 standard plug.
• Protect the power cord from being walked on or trapped, particularly at the plug and at the point
where it exits from the appliance.
• Only use attachments/accessories specified by the manufacturer.
• Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the
apparatus. When a cart or stand is used, use caution when moving it to avoid any injuries or
damage from it tipping over.
• Unplug the apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified personnel. Servicing is required when the apparatus has been
damaged in any way, such as if the power supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus or it has been exposed to rain or moisture, it does not operate
normally or has been dropped.
• Please keep the unit in a well-ventilated environment.
• The monitor should only be connected to a mains power supply as rated on the back of the equipment.
• To prevent overload, do not share the same power supply socket with too many other electronic
components.
• Do not place any connecting wires where they may be stepped on or tripped over.
• Do not place heavy items on the cable as this may cause damage.
• When removing from a socket hold by the plug and not the wires.
• Disconnect the power immediately and seek professional help if the plug or cable is damaged, liquid
has spilt onto the set, if accidentally exposed to water or moisture, if anything accidentally penetrates
the ventilation slots or if the set does not work normally.
• Do not remove the safety covers. There are no user serviceable parts inside.