Install The Software - Canon CanoScan 4200F Quick Start Manual

Install the Software

Install the Software
• If you are running Windows XP or Windows
2000 Professional with multiple user accounts,
you should log on with an administrator user
name when installing or uninstalling software
programs.
1
Turn the computer on.
If the "Found New Hardware Wizard" or
"Add New Hardware Wizard" appears, click [Cancel].
2
Place the CanoScan Setup Utility CD-ROM in the drive.
After you select your language, the CanoScan Setup Utility main
menu will display.
3
Click [Install the Software].
Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if
you accept the terms.
The [Install] window will display.
4
Click [Start Installation].
You will install five software programs and the Scanning Guide
(HTML format manual).
5
The installation procedure will start.
Follow the on-screen message prompts and click [Next] or [Yes]
to continue the installation.
• In a few cases, your operating system may
require a restart. Follow the on-screen
messages to restart and resume installation.
6
When the installation is complete, click [Yes].
The computer will restart.
7
After Windows restarts, remove the CD-ROM from
the drive and store it in a safe place.
4