Terminal block D
Q5
Output 5
Q6
Output 6
Q7
Output 7
Q8
Output 8
1.4 What is needed?
To start, you'll need:
A power supply. The minimum rating is 12Vdc/1A.
A working Ethernet network and an Ethernet cable, or alternatively, a cross-over
Ethernet cable.
A personal computer or any kind of device that can run a web browser.
2 Installation
2.1 Connection blocks
2.2 Connecting
2.2.1 Power
Power should be connected in the V+ and GND terminals.
2.2.2 Digital inputs
The inputs are photocoupled , organized in 2 groups. The activation voltage, applied between
the terminal C1 (or C2) and the input terminal, is between 8V(RMS) and 24V(RMS). Here are
some examples of connection diagrams:
Terminal block E
I1
Input 1
I2
Input 2
I3
Input 3
I4
Input 4
I5
Input 5
I6
Input 6
I7
Input 7
I8
Input 8
6