Table of Contents
Advertisement
6.4 Device hardware configuration
The device configuration can be obtained, retrieving the file ioconfig.xml from IO.XEC. The
location of the file is:
http://<address>/protect/ioconfig.xml
Example:
<response>
<all_configs>
<anain option="0">
<option_name>Disabled</option_name>
<min_val>--</min_val>
<max_val>--</max_val>
<precision>--</precision>
</anain>
<anain option="1">
<option_name>Enabled</option_name>
<min_val>0.00</min_val>
<max_val>10.00</max_val>
<precision>0.01</precision>
</anain>
<anatemp option="0">
<option_name>Disabled</option_name>
<min_val>--</min_val>
<max_val>--</max_val>
<precision>--</precision>
</anatemp>
<anatemp option="1">
<option_name>LM35</option_name>
<min_val>0.0</min_val>
<max_val>150.0</max_val>
<precision>0.1</precision>
</anatemp>
<anatemp option="2">
<option_name>MCP9701</option_name>
<min_val>-40.0</min_val>
<max_val>125.0</max_val>
<precision>0.1</precision>
</anatemp>
<digtrh option="0">
<option_name>Disabled</option_name>
<min_val_t>--</min_val_t>
<max_val_t>--</max_val_t>
<precision>--</precision>
<min_val_rh>--</min_val_rh>
<max_val_rh>--</max_val_rh>
<precision>--</precision>
</digtrh>
<digtrh option="1">
<option_name>SHT75</option_name>
<min_val_t>-40.0</min_val_t>
17
Advertisement
Table of Contents
