Table of Contents
Advertisement
Password:
To reset the settings to the factory defaults, do the following:
1. With IO.XEC turned on, push and hold the reset button. The with LED lights steady.
2. Hold the reset, until the LED starts flashing
3. Release the reset button, and IO.XEC will boot with the new settings.
6 HTTP API IO.XEC
6.1 Introduction
This secion describes the HTTP API of IO.XEC devices. This Application Programming Interface
(API) permits the integration of this device in third party services and applications.
IO.XEC allows access to all its functionality via a proprietary HTTP API. Thought this API, third
party applications can control, if authenticated, the outputs of the device and retrieve the
status of the inputs.
The API implements a bridge between an automation application and physical inputs, outputs
and sensors.
6.2 Communications
Data is exchanged trough TCIP protocol. This HTTP API it is based on the HTTP protocol which
goes on top of TCP data links.
6.2.1 System port
The port used is the default for HTTP connections: 80.
6.2.2 Authentication
ioxec
15
Advertisement
Table of Contents
