Power Lamp And Alarm Lamp Flash Alternately - Canon PIXMA iP6600D Series Quick Start Manual

Problem Possible Cause
Printer is not ready
"Error No.: 300"
Printer is not
properly connected
Printer you want to
use is not selected
on the Printer List
Waste ink absorber
almost full
"Error No.: 1700"
Inner cover is open
when printing
"Error No.: 1851"
starts
Inner cover is
opened while
"Error No.: 1856"
printing
A specified period
of time has elapsed
"Error No.: 2001" without receiving a
response from the
digital camera/The
digital camera or
digital video
camcorder
connected is not
compatible with
this printer
Automatic Print
Head alignment
"Error No.: 2500"
failed

POWER Lamp and Alarm Lamp Flash Alternately

Problem Possible Cause
POWER Lamp and An error that
Alarm Lamp Flash requires contacting
Alternately the Customer Care
Center may have
occurred
Ensure that the POWER lamp lights.
If the POWER lamp is off, turn the printer on.
The POWER lamp will flash when the printer is initializing. Wait until the POWER
lamp stops flashing.
When the Alarm lamp lights, an error may occur in the printer. For details on how
to resolve the error, refer to "An Error Message is Displayed on the LCD" in the
Direct Printing Guide .
Ensure that the printer is securely connected to the computer.
If using a switching hub or other device, disconnect the printer
and reconnect it directly to the computer and try printing again.
If successful, the problem may have been with the device.
There could also be a problem with the cable(s). Replace the
cable(s) and try printing again.
Select iP6600D iP6600D iP6600D on the Printer iP6600D Printer pop-up menu on the Print Printer Printer
If iP6600D iP6600D iP6600D does not appear on the Printer iP6600D
confirm the printer settings:
1. Select Edit Printer List Edit Printer List from the Printer Edit Printer List Edit Printer List
The Printer List Printer List Printer List opens. Printer List
2. Ensure that the iP6600D iP6600D is selected in the Printer List
iP6600D iP6600D
If iP6600D iP6600D is not displayed in the Printer List iP6600D iP6600D
details, refer to the Printer Setup Utility Help in the Mac Help.
The printer has a built-in waste ink absorber to hold the ink used during print
head cleaning, for example. This error message indicates that this ink absorber
is nearly full.
Press the OK button to clear the error so you can continue printing. Before the
waste ink absorber becomes completely full, contact the Customer Care Center.
When you experience this error, you will need to call for servicing to replace the
waste ink absorber and to check the printer for proper operation.
Close the inner cover, then press the OK button.
Close the inner cover, then press the OK button.
One page of the print data being sent at the time of the error will be erased, so
print that page again.
Disconnect the camera cable, and reconnect it.
Depending on the model or brand of your device, you may have to
select a print mode compliant with PictBridge before connecting
the device.
You may also have to turn on the device or select Play mode
manually after connecting the device to the printer.
Perform necessary operations according to the instruction manual
supplied with your device.
If the error is still unresolved, there is a possibility that you are using a digital
camera or digital video camcorder that is not supported by this printer. Use a
digital camera or digital video camcorder compatible with this printer.
Refer to "An Error Message is Displayed on the LCD" in the Direct Printing
Guide .
Disconnect the printer cable from the printer, and then turn the printer off and
unplug the printer from the power supply. Plug the printer back in and turn the
printer back on after leaving it for a while.
If the problem remains, contact the Customer Care Center.
Troubleshooting
Try This
Print Print Print dialog box.
Printer pop-up menu, do the following to Printer Printer
Printer Printer Printer pop-up menu on the Print
Printer List.
Printer List Printer List
Printer List, click Add Printer List Printer List Add to add the printer. For Add Add
Try This
Print dialog box. Print Print
43