The attendant must view the
platform as it lowers to be certain
the entire platform reaches and
rests safely on the ground. Stop
pressing the DOWN switch if any
portion of the platform is obstruct-
ed while descending or the entire
platform does not reach ground
Operation Notes and Details
level for any reason (contact
with an obstruction, mechanical
failure, exceeding the lift "floor-to-
ground" capacity, etc.). After the
platform is fully lowered, the at-
tendant should continue to press
the DOWN switch to unfold the
outer barrier fully (ramp position).
Outer Barrier
Fully-Deployed
Outer Barriers
(Up-vertical)
(Ramp position)
Note: The barrier must be fully
unfolded until the entire wheel-
chair (or standee) has crossed
the barrier when loading or un-
loading at ground level. Discon-
tinue lift operation immediately if
the outer barriers do not operate
properly.
Fully-Unfolded
Barriers
Page 19