Daikin RXZ09NV1S Service Manual page 6

Outer Panels / Outdoor Fan / Fan Motor
Step
8 Remove the nut and
remove the outdoor fan.
9 Unfasten the 2 hooks
and release the fan
motor lead wire.
10 Remove the 4 screws
and remove the fan
motor.
4
Procedure
Nut
Outdoor fan
Fan motor
(R21570)
Hook
(R21571)
(R21572)
Si001412E
Points
Nut size: M6
10 mm
(0.39 inch)
(R18954)
When reassembling, align
the mark of the outdoor
fan with the D-cut section of
the motor shaft.
When reassembling, put the
fan motor lead wire through
the back of the fan motor
(so as not to be entangled
with the outdoor fan).
Lead wire Outdoor fan
(R3249)
Be sure to remove the lower
screws first. If the upper
screws are removed first,
the fan motor may tilt or fall
because the center of its
gravity is toward the front. It
may cause injuries.
Removal Procedure