Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Weco UPF Series
Summary of Contents for Weco UPF Series
- Page 1 UPF SERIES DOOR DETECTOR USER MANUAL Version UM.UPF...
- Page 2 INSTALLATION INSTRUCTIONS Securely fix the transmitter and receiver to the car/car doors through the fixing holes with the bolts provided, ensuring that the labels are pointing outwards. Ensure that both the receiver and the transmitter are at the same level. Connect the cables from the receiver and the transmitter to the input terminals of the door controller.
- Page 3 NOTES AND ADVICE · Keep connection cables away from high voltage and/or high current wires. · Keep connection cables away from the door motor and door drive. · Avoid direct sunlight or other infrared ingress to the receiver (RX). · Prior to power-on, clean the lenses with a soft, damp cloth. ·...
- Page 4 TROUBLESHOOTING Neither LED in the receiver is lit. The cable is broken or not connected. The plastic filter is too dirty. Both the yellow and red LEDs of the door Other infrared equipment is nearby. detector are lit without interruption The ambient light is stronger than allowed.
Need help?
Do you have a question about the UPF Series and is the answer not in the manual?
Questions and answers