CONTENTS - INTRODUCTION ......................page 1 - ROTOR TECHNICAL DATA ..................page 2 - MOUNTING INSTRUCTIONS .................. page 3 1. Where to install the sat dish ..................page 3 2. Rotor’s installation ....................page 3 3. Connections ........................ page 4 3.1 Specifications of the recommended coaxial cable...........
Page 3
DEAR CUSTOMER, Congratulations! You are now the owner of STAB ROTOR SAT. This is the first sat motor developed by STAB in cooperation with EUTELSAT in order to define the DiSEqC 1.2 standard. ROTOR SAT HH100 - HH120 Attention: •...
- Fine tuning impulse 0,1° - Fine tuning impulse 0,1° - Inclination max 70° - Inclination max 70° - Weight 3 Kg - Weight 3,2 Kg OPTION - Extension for antenna support Rotor Sat HH100-HH120 instructions manual – page 2...
(fig. 4) and connect the rotor’s REC plug to the plug of your receiver VIBRATION (fig. 5 - cable2). Warning: - See cable specifications on page 4. FIG. 2 SOUTH FIG. 3 15 mm FIG. 4 8 mm F-CONNECTOR 3 mm Rotor Sat HH100-HH120 instructions manual – page 3...
(from 98.4 to 196.8 feet) Cable type sat coaxial cable sat coaxial cable Inner conductor CU ø=1,02 mm CU ø=1,13 mm Inner conductor resistance 22 ohm/Km 18 ohm/Km Outside conductor resistance 22 ohm/Km 10 ohm/Km Rotor Sat HH100-HH120 instructions manual – page 4...
Example: VENICE - around 6,9° EAST - (fig. 8) ex. VENICE 6,9° Rotor Sat HH100-HH120 instructions manual – page 6...
Page 12
Find the best picture and store the new position. Now you can operate the recalculation (if your receiver gets the function). If not, you have to go back to each memorized position, check the best picture and store all positions one by one. Rotor Sat HH100-HH120 instructions manual – page 7...
Page 13
FIG. 12 SOUTH WRONG ORBIT IDEAL ORBIT 60° 0° 60° BOLT A FIG. 13 SOUTH WRONG ORBIT IDEAL ORBIT 60° 0° 60° FIG. 14 SOUTH WRONG ORBIT IDEAL ORBIT 60° 0° 60° Rotor Sat HH100-HH120 instructions manual – page 8...
13 Autofocus (only for enabled receivers) 13.1. The rotor is provided with a special function called “autofocus”: this procedure allows the rotor to focus automatically the satellites before storing. Only some receivers are provided with this command. Rotor Sat HH100-HH120 instructions manual – page 10...
7. Extreme East/West satellites Wrong setting of rotor’s elevation Repeat more carefully the pro- signals are not received. angle. cedures on page 6, paragraphs 8. Central satellites signals are 4, 5, 6. not received. Rotor Sat HH100-HH120 instructions manual – page 11...
This warranty covers all production defects and working faults, but excludes all damages caused by drops, incorrect use or external oxidations due to incorrect installation. Any repair made by unauthorised personnel will automatically cancel this warranty. Rotor Sat HH100-HH120 instructions manual – page 12...
Page 18
Via Seminiato, 79 - 44031 AMBROGIO (FERRARA) - ITALY Local time 8.00 to 12.00 a.m. and 1.30 to 5.30 p.m. (MIDDLE EUROPE time) Phone +39-0532-830739 Fax +39-0532-830609 http//: www.stab-italia.com e-mail: sandro@stab-italia.com www.stab-italia.com e-mail: sandro@stab-italia.com PRINT BACK TO THE CONTENTS TABLE Rotor Sat HH100-HH120 instructions manual – page 13...
Need help?
Do you have a question about the ROTOR SAT HH100 and is the answer not in the manual?
Questions and answers