Canon PIXMA iP4000 Series Start Here page 2

6
Cassette Loading
NOTE: Loading paper in the cassette provides additional
paper handling flexibility. For additional information
visit the electronic User's Guide.
1 Pull out the cassette from the bottom of
the printer.
7
®
Windows Printer Driver Installation and Print Head Alignment
1
Be sure to TURN THE PRINTER OFF
before continuing.
NOTE: For Windows ® XP or Windows
2000, log on to Windows as a member
of the Administrators group before
continuing.
IMPORTANT: If you see the Found New
Hardware Wizard, click Cancel.
2 Close any open software applications
including anti-virus, computer security
and other software. Then insert the Setup
Software & User's Guide CD-ROM. The
setup program should run automatically.
NOTE: If the setup program does not
run, click Start, then Run, then type
D:\msetup.exe, where D is your
CD-ROM drive.
When the main menu appears,
3
click Easy Install.
NOTE: Select Easy Install in order to install
all of the application software, electronic
manual and printer driver. Select Custom
Install in order to choose the options you
would like to install.
Part no. QA7-3281-V01 © 2004 Canon U.S.A., Inc. Canon is a Registered Trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. P-iP4000-ESI-0304 Printed in Thailand.
2 Remove the top cover of the cassette.
Top Cover
NOTE: For letter-size
(8.5" x 11") paper, push
the cassette release lever
and extend the tray.
Cassette
Release Lever
4 When the "Printer Connection" window appears,
TURN THE PRINTER ON. The software will begin
identifying the printer port being used.
IMPORTANT: If your computer cannot
detect a printer port, click Help and
refer to the online instructions.
Follow the on-screen instructions to install the
5
remaining software. When the "Installation
Results" window appears, click OK.
Follow the on-screen instructions to register
6
your product.
When the "Print Head Alignment" screen
7
appears, ensure that letter size paper is loaded
in the auto sheet feeder (top paper feeder). Click
Execute and follow on-screen instructions.
NOTE: Print head alignment will take
several minutes to complete.
8 When the "Installation completed successfully"
screen appears, click Restart.
3 Slide the long edge paper guide to the left and
the short edge paper guide toward you.
Long Edge
Guide
Short Edge
Guide
4 Load paper so that the top right corner touches
the inside corner of the cassette. Adjust paper
guides to the edges of paper.
Top Right
Corner
7
®
Macintosh Printer Driver Installation and Print Head Alignment
NOTE: For Mac OS 9.x printer driver instructions,
refer to the "Appendix" of the Quick Start Guide.
1 Turn on your Mac and your printer and insert the
"Setup Software & User's Guide" CD-ROM.
NOTE: Log on as an Administrator
before continuing.
Double-click the CD-ROM icon, then the
2
Mac OS X folder, then the Printer Driver folder.
3 Double-click the iP4000 260.pkg icon,
then follow the on-screen instructions.
NOTE: When the "Authenticate" screen appears,
enter your administrator name and password.
If you do not know your administrator name
or password, click , then follow the
on-screen instructions.
When the message "The software was
4
successfully installed" appears, click Restart.
5 When a message asking you to align the print
head appears, click OK.
5 Replace the top cover of the cassette.
Top Cover
6 Insert cassette completely into the printer
until it clicks into place.
click
NOTE: For letter-size (8.5" x 11")
paper, the front edge of the cassette
will extend beyond the bottom
of the printer.
Start the print head alignment procedure.
6
a. Double-click the Macintosh HD icon, then
Applications folder. Double-click the Utilities
folder, then the Printer Setup Utility icon.
b. When the Printer List screen appears, select
PIXMA iP4000, then click the Utility icon.
c. Select PIXMA iP4000 and click Maintenance.
d. Ensure that letter size paper is loaded in the
auto sheet feeder (top paper feeder).
e. Click the down-arrow to select Test Print.
Click the Print Head Alignment icon and
follow the on-screen instructions.
NOTE: Print head alignment will take
several minutes to complete.
7 Ensure that the auto sheet feeder lamp is
lit. If not, press the paper feed switch.
Auto
Sheet Feeder
Lamp
Cassette
Feeder
Lamp
Paper Feed
Switch
IMPORTANT: To successfully
complete the next step, Software
Installation, ensure 8.5" x 11"
paper is loaded in the Auto Sheet
Feeder (top paper feeder).
7 Click Quit to exit the BJ Printer Utility. Print head
alignment is now complete.
8 Access your CD-ROM again. From the
Application folder on the CD-ROM, double-
click on the software to be installed.
Follow the on-screen instructions. When the
9
"Installation has finished" screen appears,
click OK.
10 Double-click on the Product Registration
icon, found in the Mac OS X folder, to
register your product.